Thursday, July 20, 2017

I'm here for you......

Hi everyone, Steph Ackerman here today working with a bunch of products from the Rubber Buggy Store.  Be sure you stop by the store to see all the products available. 

I used the Heartfelt Creations Tropical Hibiscus stamp and coordinating die set.  I stamped the leaves on green cardstock and the flowers on Vintage Emporium papers from Prima Maketing using black ink.  After die cutting the flowers, I used the pad and 2 sizes of stylus from the Heartfelt Creations Deluxe Flower Shaping Kit on the flowers. 

Next, I layered the petals together to form the flower.  Using Beacon Adhesives 3-in-1 Craft Glue, each petal was adhered together.

Die cut 2 shades of blue cardstock with oval dies.  Score the top layer every 1/4" and ink with Ranger Stormy Sky Distress Ink.   Place a sheet of  Vintage Emporium paper under the oval and stamp the phrase from the Guiding Light stamp set by WPlus9 slightly off center.

Adhere the flower and leaves in the opening.  Then add some Nuvo drops in the center.

The light blue layer was added to the bottom layer with foam adhesives from Scrapbook Adhesives  for dimension.

Thank you for visiting.
Pin It!

Wednesday, July 19, 2017

Summer Planner Decoraton with Netra

 Hey everyone !!
Summer is surely here. It has been a wonderful summer so far. 
Today I decided to set up my planner. 
I kept my last setup and decoration for the longest time. 
I loved it. 
I may keep this one for a while too. 

Here is a quick tip
I use washi tape to stick my flowers where ever I want. 
I also use Clips to add die cuts that I'll reuse later on other projects. 

Thanks for stopping by. 
Xo, Netra 
Products used

Thank you for visiting
Pin It!

Magnolia Unicorn Gift Cards

Hi it's Jennifer here with some cute gift cards. 
I have used the new stamp from
Magnolia - I Believe in Unicorns and stamped them up with
LF Premium Jet Black Ink my new favorite ink for stamping 
and using with my copics.
Don't they go well with the
On each card I have created a rainbow and 2 of them
 I used the clouds from  WPlus9 Sunshine Layers and

I have used the  LF Stitched Circle Frames and
LF Large Stitched Circles to create a shaker and a
 really small mix of Sequins to create the shaker.

  I have used a mix of bright copics to colour them up to
match the papers.
All these products and more are avaliable at the
The Rubber Buggy Shop and don't forget to visit us on Facebook 
 look for the Videos down the side too, Instragram and the 
Rubber Buggy Design Team Blog where there's a post nearly
 everyday from one of the team.
Happy Crafting

Pin It!

Monday, July 17, 2017

Spring project using PhotoPlay Bloom Colleciton

Hi it's Bev here to today at The Rubber Buggy.  I am sharing a fun spring page using PhotoPlay Bloom Collection and a sketch from Creative Inspirations with myself Bev Code.  Using the sketch below and photos of my eldest Grand Daughter I created this amazing page sharing memories of our great BBQ / Horseshoe Tournaments at the best place ever ... the cottage at Conestoga Lake.

Supply List:
The Rubber Buggy Products
Paper: PhotoPlay Bloom
Ink: Tim Holtz Vintage distress ink, Pen
Accents: Creative Embellishment chipboard frame & happy, 
flair buttons
Other: star metal brads, Petaloo mini Butterflies,
Sketch: CI Bev Code

In the close up views you can see the accents and details better. Here the chipboard frame and the butterfly cluster with tag and some layers of print papers are showcased.

Fabulous mix of fun bright colours in the stickers, paper and alpha stickers.

I outlined the stickers with black pen to make them pop.

Lots of layer of print papers with great colours along with flair button and title with a butterfly. Across top slanted border there are some fun metal stars.

In this section I outlined again with black pen to make them pop.

This collection is so much fun, bright and everything in the kit made it easy to create with .


Thanks for joining me today... take time to visit the store for these and so many other amazing products.

Pin It!

Saturday, July 15, 2017

It's A Beautiful World

Welcome back to my Saturday's posting for The Rubber Buggy on-line store.  Hi, Nancy Hill, and excited to share a three fold card with a packet of petunia seeds.

I have many friends in garden clubs who would love a special card with a packet of petunia seeds for this potting this year.  Enclosed in the center of this card is a packet of petunia seeds.

Heartfelt Creations Butterfly Medley Stamp set 
Heartfelt Creations Butterfly Medley Die set
Colored pencils or Copic markers for the butterfly
Artificial flower stamens
Burpee Packet of Petunia Seeds
NUVO Crystal Drops – Crystal Glaze


Card measures 6” x 6”.  Cut two 6” x 12” pink card stock for the main frame and score in the center of each frame.  Adhere two sections together to form three pages. 

Use the pink paper to cut two Heartfelt Creations Fleur Border Basic dies.  

First Page:  Cut the patterned paper 4” x 6”.  Use the 7” x 1.75” plain border die to cut the patterned papers for the front of the first page and pink main frame for this page.  Place the plain border die on the left side at 4 ½” and ends on the left at ¼”.  Use the other plain border die to cut the patterned paper for the back of this page.  Adhere the front page to the pink main frame.  Adhere one pink HC Fleur Border die as shown on the photo of the card.  Adhere the back of the patterned paper to the pink main frame of this first page. 

Second Page:  Repeat the same instructions for the first page except place the plain border on the right side at 4 ½” and ends on the left side at 3 ¼”.

Inside of Card:  Cut out two 6” x 6” pictures and 4 ½” x 4 ½” pictures found in the Heartfelt Creations Classic Petunia Paper. Adhere the 6” picture to the pink main frame.  Glue only the top and bottom of the 4 ½” picture.  You might want to place your packet of seeds on the back of the picture and then add glue to the top and bottom to make sure your packet will be able to slide out then the glue dries. 

Butterfly:  Stamp the butterfly with black embossing powder on the pink card stock.  Color it with colored pencils or Copic markers.  Adhere to card.  Using the instructions of making these petunias as shown below and adhere the white artificial flower stamens.   Add the leaves to the flowers and adhere to the card.  Add NUVO Crystal Drops to part of the leaves.  

The Rubber Buggy Design Team has something new to share with you each day.  Pop in and see for yourself what is being shared by this talented group of inspiring designers!!

In the meantime, here are all The Rubber Buggy quick links you will need:
Thank you again for stopping by 
Nancy Hill

Designer for The Rubber Buggy
Pin It!

Thursday, July 13, 2017

Fish Fun with Memory Box

Hi everyone, Steph Ackerman here today working with a bunch of products from the Rubber Buggy Store.  Have you checked out the store lately?  It has so many wonderful new products.

This Memory Box die was perfect for creating a water themed card.  Using Riddersholm pattern paper - Christmas Cozy, I placed the die in the center.  Once die cut, I used Prima acrylic paint in Rose Gold to paint the coral.  Next, I used Ranger Distress Ink in Stormy Sky to ink around the panel.

I placed the panel on Bazzill Whilypop cardstock and adhere it to the card.  Finally, I created a fish from clay and adhere it under the coral with Beacon 3-in-1 Craft Glue.

Thank you for visiting
Pin It!

Tuesday, July 11, 2017

Ahoy Matey

Hi it's Jennifer here with a card I created using
Lawn Fawn Ahoy Matey it is also avaliable in 
a lot of  fussy cutting. I have coloured them up in all different
colour Copics.

So I have done a Border Shaker Card using
LF Fancy Scalloped Rectangles the largest and largest
LF Stitched 4 Bar Rectangles also. I cut a frame.
I added acetate to the back and die cut 
LF Small 4 Bar Stitched Rectangle and  added 2 clouds
one of each of the LF Puffy Cloud. 1 in card stock and the other 
1 in velum layered to look good. I also cut them out using the
center rectangle die and the glued them on. Papers used are
LF Rainbow Perfectly Plaid 6x6 the sequins are a mix from all the
newly stocked range of Sequins. I have created a shaker card
using the 3D Tape around the edge of the image piece
that I taped to the center of the acetate and the frame. 
All these products and more are avaliable at the
The Rubber Buggy Shop and don't forget to visit us on Facebook 
 look for the Videos down the side too, Instragram and the 
Rubber Buggy Design Team Blog where there's a post nearly
 everyday from one of the team.

Happy Crafting
Pin It!

Monday, July 10, 2017

'All Things Grow with Love' using amazing Blue Fern Studios products

Hi ... it;s Bev here today. Sure hope you had a great weekend.
This 'All things Grow with Love' page is my eldest Grand Daughter. The products from The Rubber Buggy were the perfect combo to highlight the photo. Amazing Blue Fern Studios paper and chippies mixed many other fabulous products made for this stunning page.

Supply List:
The Rubber Buggy Products
Paper: Blue Fern Studios Garden Life
Chipboard: Blue Fern Studios Deja Vu Border
Flowers: 49 Market canvas and Burlap small blooms
Accents: Fire Fly ephemera Collage Kit
Ink: Tim Holtz ranger
Tools: Blending Tool
Marker: copics
Other: sew easy ink roller, signo white gel pen, corrugated cardboard, mesh

I used lots of layers, shapes and accents on this page. In the close up photos you can see thing up close and view easier.

Super fun journal strips, great clustered flowers and  great piece of lace.

Amazing copic coloured chipboard accent.

The photo is backed with fun colour layers and surrounded by a great mix of accents... all which showcase the photo.

Thanks for stopping by... see you again soon.

Pin It!

Total Pageviews

Related Posts Plugin for WordPress, Blogger...